lightweight fireproof cement foam insulated wall
panel making machine
The production line adopts the technology of double-drive
double-roller extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth,
compounding and repressing. fireproof mgo board production line runs stably with high automatic degree, the specification of
its product can be adjusted arbitrarily. The equipment actually realizes the industrial production line of
model building wall board, and the boards have even and glazed
The equipment largely reduces the labor intensity of worker and
thoroughly changes many shortages of the former casting forming
with upright mould or flat mould, such as large mould usage, low
recycling rate, required electrical heating
or steam heating, single kind of product as well as the sound
heat-preserving which don’tmeet the market requirements.
There is not any requirement about high temperature and high
pressure during production processing. The board will be formed at one time after roller-extruding under the conditions of normal
temperature and normal pressure.This is a green environmental-protection
project, because that there is no waste water, waste materials and
waste gas during its production processing. The finished board
don’t need high temperature drying, air-drying and watering,and
under the normal temperature, they will dry well indoor.
Low labour and raw materials costs
Up to 30 years
Reused for more than 8 times
Environment-friendly raw materials used
adjusted according to your requirement
This automatic mgo board production line in China is made up of two
parts, Board making machine line and Board four-sides cutting machine Line
Board Making machine Line
Mixing cement mortar of up and own materials
Mixing middle materials
Crush and collection material after cutting
Duplex units feed in mould board
Automatic feed-in mould board on the main formed units, no need by
manual, can reduce labor, improve work speed.
Main formed units
It includes all of device of automatic feed-in cement mortar, fiber
cloth, spreading, one-time forming and etc.
It can adhibit the PVC paper on the mould board by automatic. (Or
brush the oil on the mould board)
Automatic tracking cutting device
It can cut the product on production line when it’s wet, and it
will not hurt the product and mould board, reduce the labor, low
labor intensity .
Hydraulic lifter of receiving board system
It can load the formed board on the form rack, reduce labor, reduce
hurting the board when by manual, and improve automatic.
PLC Control system
Control the production line automatic.
The production line is composed of board-making
machine,glue-spreading and veneering-drying machine and glazing
machine.according to the production and
the automatic degree, this production line is divided into 6 models
and three specifications ,such as large ,middle and small
specification.The production line
for mgo board has :production workshop ,finished product workshop
and raw material warehouse . workshop:100---1000m2,
water,electricity:1.1—10KW(according to different scale)
1. The source of the production raw materials is widely with no
regional restriction. The product is made of cement, sand,fiber
glass mesh, on-woven fabrics and other fillers. The board is formed one-time by the machine. It is easy operation, low
production cost, small investment and fast effectiveness.
2. The automatic mgo board production line has high automatic
degree, simple production technology, low labor intensity and production line is no noise and
three wastes (waste water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of
chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
4. It can produce according to different customers' request like
size (length* width*thickness) , material .This automatic mgo board production line in China can produce boards Max
length 3660mm and width is 1250mm.Thickness from 3-25mm.
cement foam wall panel features
1. Anti-earthquake with light quality:
In view of its weight per unit area is only 1/10 of red brick wall,
the product has
good anti-earthquake performance. It can be used at low-rise
high-rise building, and it is preferred to be used at workshop with
steel frame structure. It can replace the color steel plate with
its better performance.
2. Fast and convenient operation:
It can be installed by board or combination with the dry method,
and the product
can be nailed, cut, planed, drilled and sticked.
3. Low comprehensive cost:
The product is made of agricultural and industrial wastes, so the
cost is low. With the low load of girder and short construction
period, it can
reduce over 20% of engineering cost after compared with solid brick
and hollow brick.
4. Energy-saving and environmental protection:
The production processing need no high temperature and high
a green environmental-protection energy-saving building materials,
has no toxicity, harm, pollution and radioactivity.
5. Increasing the usage area:
Under the same condition of heat-preserving and sound insulation,
thinner plate, the product can increase over 10% usage area after
with the same building.
6. Having the following features:
fireproofing, water-proof, anti-impact, acid & alkali resistant
1)Fully life-cycle value services
Our company provides mgo board production line design ,cost
installation and operation,equipment maintenance and the whole life
2) complete data specification
Provide production line equipment technical data and
the mgo board production line formula.
3) quality commitment
The company regards product quality as the lives of enterprise,the
main components and wearing parts are made of high quality
wear-resistant materials and advanced processing technology,so that
the equipment endurable and wear
resisting ,wearing parts warranty for one year.
4) Trade service
We can help the customer to do the consignment and the relevant
procedure for import and export.
Q1.What’s your advantage? Why we choose you?
A:1)10 Years experience of test pen production and R&D.We have
professional techniques and team. More advantage in price
2)Great production capacity Sustainable Supply . According to
customer requirements, We support the customized.
3)The project is envoronmental protection.The main raw materials
are from gricultural and industrial waste, such as crops straw,
sawdust, fly ash, sand
and etc. The products are absolutely ecological and low cost.
Q2.What’s the Payment?
A:T/T would be better with quick transfer and few bank fees. LC
could also be accept, but the procedure is complex and the fee is
Q3.Are you a factory or trading company?
A:We are a professional manufacturer. We are warmly welcome clients
from worldwide to visit our factory and cooperate with us.
Q4:How long is the warranty of your equipment?
Q5:Do you supply spare parts?
A:Excellent easy broken parts support for buyers. Easy broken parts
for one year.
Q6:Will you provide trainning?
A:The training is free of charge , and our engineer will be on duty
to train your worker.
Q7:How will you provide installation&commissioning?
A:Will provide 2~8 persons (adjustable according to the degree of
automatic )for installation.