EPS roof and wall panel iron sheet forming machine production line
Specifications of Wall Panel Machine
The equipment has high automatization degree, simple production
technology, low labor intensity and production line, and there is no noise
and three-wastes during production.
|capacity||1200 sheets / shift|
|Features of machine||Long Worklife|
|Raw materials||mgo/mgcl/fiber glass mesh|
wall panel machine
Wall Board Features
1. Anti-earthquake with light quality:
In view of its weight per unit area is only 1/10 of red brick wall,
the product has good anti-earthquake performance. It can be used at
low-rise building and high-rise building, and it is preferred to be
used at workshop with steel frame structure. It can replace the
color steel plate with its better performance.
2. Fast and convenient operation:
It can be installed by board or combination with the dry method,
and the product can be nailed, cut, planed, drilled and sticked.
3. Low comprehensive cost:
The product is made of agricultural and industrial wastes, so the
production cost is low. With the low load of girder and short
construction period, it can reduce over 20% of engineering cost
after compared with solid brick and hollow brick.
4. Energy-saving and environmental protection:
The production processing need no high temperature and high
pressure. Being a green environmental-protection energy-saving
building materials, the product has no toxicity, harm, pollution
5. Increasing the usage area:
Under the same condition of heat-preserving and sound insulation,
with the thinner plate, the product can increase over 10% usage
area after compared with the same building.
There is not any requirement about high temperature and high
during production processing. the boarad will be formed at one time after
roller-extruding under the conditions of normal temperation and normal
pressure .this is a green environmental-protection project, because
there is no waste water ,waste materials and waste gas during its production
processing .the finised board don’t need high temperature drying ,air-drying
and watering ,and under the normal temperature ,they will dry well
|Oxygenic index %||>90|
|Water content rate||10.9%|
|Static bending intentsity||169.46Mpa|
Wall board production line has workshop and raw material warehouse.
Workshop: over 300m2-800m2,
worker: 10-16 person; fresh water; electricity:8-20KW
Contact Us:whatsapp: +86 18668917597skype: +86 18668917597email address: email@example.com