Fiber Cement Board Making Machine , Full Automatic EPS Sandwich Panel Production Line
Full-Automatic Magnesium Oxide Board (MGO board) Production Line,Fiber Cement Board Making Machine
Automatic kind:
1. Production line has good design, reasonable structure, stable running and using dual-channel roll-style system. It is shaped in one time and has stable thickness. Also it has higher yield. with a vibration device, it eliminates the inside and outside bubbles. It can produce 2-60mm thickness MOG board. And the widest is 1300mm, for the length, there is no limits, and can adjust the thickness as required.
2. The equipment can have many uses. It can produce the simulation ash board, imitation red/white elm board, Oak panels, fireproof relief door board, ceiling board and wall murals etc.
3. Simulation Ash board, it has high quality cooperation with wood ash board appearance. Can do further work such as nail, sawing, planning, and sticky. Size: 1200*2440*3mm (can adjust). Daily can produce 200-1200 PCS according to different devices.
4. Fire Relief door board: Has ability of fire resistant, moisture resistant, sound insulation and thermal insulation. Also can do nail, sawing, plane, sticky work. The cost is half of wooden door board. The imitation of Europe and classical three-dimensional pattern is very elegant and antique.
5. Decorative Wall Murals: First get board from laminator machine, veneer on above and then finish to produce landscapes, insects and fish paintings. The biggest size is 1200*2500mm.
6. For MOG Board Production line, there are several departments: Produce departments, finished products department and raw materials department. Workers need: 3-6
7. Electricity: 1.1_10KW
8. Machines: High-speed mixer, 500type raw materials mixer, pulverizer, mould receiving machine, raw materials lifter, forming machine, foaming machine, oil-spreading machine, automatic cutter, double location receiving board system, automatic board-unloading unit, mould-cleaning machine, automatic four-edge cutting machine, dust-collection system, operation platform, PLC self-controlling system
9. There are many mould machines for customer to chose. Also can buy single machine.
10. Buying the production line includes the technology transferring costs.
11. Cultivate 2 technicians for customer side, and time is 7 days.
No. Test items Standard indicators Test results
1 Bending degrees
Horizontal > =22Mpa 24.9Mpa Qualified
Vertical > =17 Mpa 21.4Mpa
2 Impact strength > =2.0 KJ/m2 3.7KJ/m2 Qualified
3 Indensity > =1.6g/cm3 1.72g/cm3 Qualified
4 Water absorption < =24% 16.8% Qualified
5 Waterproofness According to the National standard GB8041 tested -24H checking allow damp mark on the back of the board, but no water drop Meet the National standard GB8041 Qualified
6 Freezing resistance According to the National standard GB8041 tested- after 25 times Cycliccrackingno break and layer appear Meet the National standard GB804
Required Raw Material | wheat straw board is made of filling materials,
such as sawdust or all kinds of crushed plant
straw (you can select any one kind) and several
chemical raw materials which are token as
modified material after special technology. |
Technical Index for finished board | 1. Oxygenic index%: >90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m3 1.13
8. Water resistance: Without chalking for 24
hours and there is no change on surface
9. No “Three-wastes” (waste water, waste gas
and waste residue), no pollution and
environmental protection |
Structure Principle for Machine | wheat straw baord machine with fashionable
design, reasonable structure, stable running
manufactured board of even thickness in large
production once through double- roller-extruding
technology. This production line is
equipped with shaking device which remove
inside and outside air bubble, so our board is
more compact. In addition, we use the no-woven
cloth as the separating film to increase the
toughness and strength of the board. The
machine can be adjusted arbitrarily, and then
produce the board with the thickness of 2-60mm,
the biggest width of 1,300mm and unlimited
length. So you can adjust the thickness of board
at will |
Product Tags:
|
|
Fiber Cement Board Making Machine , Full Automatic EPS Sandwich Panel Production Line Images
|
